A closer look at recent jobs — what we installed, how it was fitted, and the result for the home.
A complete heat-recovery ventilation system installed in the attic, with insulated ducting feeding every habitable room. The unit was commissioned and balanced before handover, so the family gets constant fresh filtered air with minimal heat loss.
Full semi-rigid radial ducting first-fixed through the timber structure before ceilings closed up. Supply and extract manifolds were hung and labelled, with every run pressure-tested so nothing is buried untested.
The unit was fitted and protected mid-build, connected to large insulated rigid ducts feeding the upstairs rooms. Wrapping the unit during construction keeps dust and plaster out of the heat exchanger until the home is ready to breathe.
Demand-controlled extract units installed in the loft and between roof trusses — a low-maintenance way to keep humidity under control in homes where full ducted MVHR isn't practical.
Send us your plans and we'll design a ventilation system to suit.
Request a quote